×

Loading...
Ad by
  • 技多不压身,工到自然成:安省技工证书特训班,点击咨询报名!
Ad by
  • 技多不压身,工到自然成:安省技工证书特训班,点击咨询报名!

How good the dooor condition is ? is 断了的金属杆 were connected to the bottom of the door?

How good the dooor condition is ?
From the picture there is a lot of rusty spot on the door at the bottom of the door where the agnle brace bracket is, the door body must be in good codition, for your own and family safety, should consider to replae it. if the door is in very bad shape.

If you think the door still ok to use. go HD buy "2 piece 1.5ft long Angle Iron" you can buy those alrady had holes punched, ( i don't remember the name of it. It is painted in light brown colour, and have hold pre punched in the entire length). Aligen the 断了的金属杆 and place one of the angle iron on top. other one on bottom, drill and screw it tight. ( do you know How Doctor repair people's broken bone) same idea, try it. good luck. try place the broken joint to the middle of the angle iron then drill and screw it tight.. Good Luck !!!
Report

Replies, comments and Discussions:

  • 枫下家园 / 美丽家居 / 车库的门支撑的金属杆子断了,不知道如何去修,去home depot问说是没有这种零件。好像电焊一下就可以了,不是自动门。谢谢。
    • holly cow, sounds like a weight bearing stand. Better have it fixed soon.
      • how can I fixed it now? Is it very serious? Somebody can help? thanks
        • suggestions about how to fix or somebody can do it or can recommend to do it. hanks
    • post a picture, a lot of ideas will come up.
      • You can see from the picture that http://www.bestpricedrugstore.com/Door%20006.jpg 金属杆子断, it suppose to connect to 支撑架子的。谢谢
        • How good the dooor condition is ? is 断了的金属杆 were connected to the bottom of the door?
          How good the dooor condition is ?
          From the picture there is a lot of rusty spot on the door at the bottom of the door where the agnle brace bracket is, the door body must be in good codition, for your own and family safety, should consider to replae it. if the door is in very bad shape.

          If you think the door still ok to use. go HD buy "2 piece 1.5ft long Angle Iron" you can buy those alrady had holes punched, ( i don't remember the name of it. It is painted in light brown colour, and have hold pre punched in the entire length). Aligen the 断了的金属杆 and place one of the angle iron on top. other one on bottom, drill and screw it tight. ( do you know How Doctor repair people's broken bone) same idea, try it. good luck. try place the broken joint to the middle of the angle iron then drill and screw it tight.. Good Luck !!!