This topic has been archived. It cannot be replied.
-
枫下家园 / 电脑用户 / 用什么办法可以确认硬盘是工作在ATA100 还是ATA33状态?买了一个新硬盘,打开了ATA100状态,但感觉比原来的ATA33硬盘还慢。
-eelvis(eelvis);
2003-1-8
(#963753@0)
-
检查一下你的硬盘线,这个很重要
-oasis(oasis);
2003-1-8
(#963771@0)
-
Thanks. 试用了80 conductor cable,好像效果更差。
-eelvis(eelvis);
2003-1-8
(#963944@0)
-
我曾经遇到类似的问题我的硬盘是quantum fireball,因为买的时候没有支持ata100的接口,只好用ata33的,速度非常慢,后来上网下在了一个把ata100 变成ata33的软件,速度提高了不少,买了新机器后,又恢复了回去,速度也很不错,我曾经上网问过,很少有人知道,而且,这好像是quantum特有的,不知道你的硬盘是什么牌子,最好到厂商的网站看一看。
-oasis(oasis);
2003-1-8
{300}
(#963988@0)
-
control panel -> system -> hardware device -> IDE ATA/ATAPI controllers -> Primary (Secondary) controllers -> Advanced Settings. This instruction applies to Win2k.
-lmx(流氓兔);
2003-1-8
(#963843@0)
-
谢谢。这里我选了DMA if available, 但current transfer mode 还是PIO mode, 什么原因限制它不用DMA模式(CMOS里已经enabled)? 有什么办法强制它用DMA模式?
-eelvis(eelvis);
2003-1-8
(#963940@0)
-
某些主板有此问题,需要装他们的Patch或者驱动。我以前用的ASUS Me99板就是如此,需要打上补丁才能正确启用(或者是正确显示)DMA。
-lmx(流氓兔);
2003-1-8
(#964475@0)
-
首先看主板是否支持
-agincourt(百灵鸟);
2003-1-8
(#964020@0)
-
主板说明书上说是支持的,所以在CMOS里有Ultra DMA enable/disable的选项。
-eelvis(eelvis);
2003-1-8
(#964131@0)
-
刚启动时屏幕会有显示“Primary IDE...UDMA5(ATA100)...[HD model]”之类的吗?
-agincourt(百灵鸟);
2003-1-8
(#964298@0)
-
这行字一闪而过,用数码相机把它拍下来,才算看清了:
Ultra DMA Mode-4, S.M.A.R.T Capable and Status OK
有问题吗?
-eelvis(eelvis);
2003-1-8
(#964372@0)
-
晕, 按pause键嘛。。呵呵
-expertune(伪而不劣);
2003-1-8
(#964594@0)
-
这表明主板识别为UDMA66(ATA66)。在正常情况下ATA66与ATA100甚至ATA133的区别不明显。如果觉得明显慢,可能是没有安装随主板提供的IDE驱动,如以VIA为芯片组的主板,要安装四合一驱动。报上你硬盘的型号来
-agincourt(百灵鸟);
2003-1-9
(#964902@0)
-
谢谢百灵鸟,看来是我自己感觉慢,实际并不很慢, 硬盘大了是否应该比小的要反应慢点? 硬盘为Western Digital 60G, 用它提高的软件不能设置,打电话给Support, 说他们也知道这个软件常有这问题,正在研究....
-eelvis(eelvis);
2003-1-9
(#964940@0)
-
有可能是主板的驱动程序没装
-oceandeep(北极熊® Zzz Zzz);
2003-1-8
(#964383@0)