This topic has been archived. It cannot be replied.
-
枫下家园 / 电脑用户 / ==准备把自己的电脑当server,但和人家公用网络,我的电脑是连在router(是房东的,我没法调试)上,用的是rogers高速,试了几个free web server, 但都不好用,输入我的ip,但连不上,==准备把自己的电脑当server,但和人家公用网络,我的电脑是连在router(是房东的,我没法调试)上,用的是rogers高速,试了几个free web server, 但都不好用,输入我的ip,但连不上,我的真实ip是24.153.xx.xxx, 因通过router,分配的ip是192.168.x.x,求助,多谢!=
-yemannvyou(野蛮女友);
2003-12-15
{246}
(#1515952@0)
-
用的一个free web server是mywebserver, 但他显示我的ip和网络连接状态上我的ip不一致,不知为何,这是否是我连不上的原因之一,mywebserver 默认使用两个port,8000 和9600,还是我通过router连接不可能用我的电脑当server? 承蒙执教
-yemannvyou(野蛮女友);
2003-12-15
(#1515961@0)
-
不可以。
-exception(违例);
2003-12-15
(#1516139@0)
-
thank you!
-yemannvyou(野蛮女友);
2003-12-15
(#1516210@0)
-
1) install ddns client or set it up if your router support that (i,e dlink di604)
2) setup forward/virtual server so that certain port forward to your server
3) this may be againt EULA between you and rogers
-jchonc(James);
2003-12-15
(#1516296@0)
-
it should be easy accroding to mywebserver software. i have tried in many different ways but not work. so i am thinking my condition (behind router, but i can't set up router, not mine) ....(behind router, but i can't set up router, not mine) now is not suitable to set my pc as server.
-yemannvyou(野蛮女友);
2003-12-15
{97}
(#1516308@0)
-
and i wonder if i install iis, will that be helpful?
-yemannvyou(野蛮女友);
2003-12-15
(#1516311@0)
-
DDNS does not help your server as all, just give you a dynamic dns, like no matter how your ip change, your address is always xxxx.dyndns.org
-jchonc(James);
2003-12-15
(#1516448@0)
-
I also tried to enable Port Forwarding or Virtual Server in my routers but it does not work either. I cannot visit my web, which runs on my intranet, from the Internet. Any ideas? Thanks.
-iexcel(馄饨面);
2003-12-15
(#1516335@0)
-
看来这是个难点,那位高手指点指点,多谢,假使要设置router的话,我是没法了,到时对上面的仁兄有用。
-yemannvyou(野蛮女友);
2003-12-15
(#1516362@0)
-
setup router is easy. Especially new routers has that options very easy to configure. Forward 80 for http, forward 443 if https, 21 if ftp......
-jchonc(James);
2003-12-15
(#1516451@0)
-
I managed to configure my routers correctly. If your router supports uPNP, try enabling it. It works for my routers.
-iexcel(馄饨面);
2003-12-15
(#1516598@0)
-
thank you guys, since it is not my router and it is landlord's, and i can't set up it, so that means i can't do that way, thanks anyway!
-yemannvyou(野蛮女友);
2003-12-16
(#1517198@0)
-
jchonc(James);说的对,需要router的密码,设置router才可以.我已经这样做了.如果你的朋友有rogers,可以让他给你10Mrogers空间.
-biosfix(BIOSXP.COM);
2003-12-18
(#1521296@0)