This topic has been archived. It cannot be replied.
-
枫下家园 / 家用电器 / 单相的220V电机可以接2个火线吗? (火线对地都是110V, 则两个火线是220V)
-iamyourfriend(iamyourfriend);
2008-5-7
(#4438423@0)
-
一看就知道是大学普通物理忘了. 我也忘了, :)) 但是我知道不是简单加起来的关系, 应该是110乘以根号3等于190伏.
-david2(David);
2008-5-7
(#4438472@0)
-
你的大学物理是在中国学的,中国供电系统和加拿大不同,加拿大俩火线确实是反相的,直接接上正好是220V。
-frankhare(小米);
2008-5-13
(#4449973@0)
-
不能吧!电器基本都是单相.
-canalink(战士);
2008-5-7
(#4438497@0)
-
家用电器
-canalink(战士);
2008-5-7
(#4438517@0)
-
Sure, u can do that. No problem.
-wh120();
2008-5-7
(#4438507@0)
-
两个火线相位不同,相对电压不是直接相加,不到220伏。David给的数字基本正确。接电机,输出功率小点而已,应该没问题。
-ayardaway(漫漫);
2008-5-7
(#4438511@0)
-
谢谢你们的回复! 因为在国内从来没有这么接过电机, 感觉应该可以, 但就是不确信, 因为不知道相相之间还是不是50HZ的正玄波
-iamyourfriend(iamyourfriend);
2008-5-7
(#4438871@0)
-
50Hz是不可能的了。
-nww(西北偏西);
2008-5-8
(#4441197@0)
-
不用谢。相位会变,但还是那个波形。北美用60Hz,如果只是接交流电机,转速可能会有影响,看你带什么负荷了,一般的问题不大,就是不在最佳工作状态罢了。
-ayardaway(漫漫);
2008-5-13
(#4449983@0)
-
加拿大的供电进户系统与中国的不同,按照我的理解,楼主说的是可行的。加拿大的民用供电系统的进户线是4根,是两根火线,一根零线,一根地线,其中两根火线是完全反相的,对零线之间的电压都是120V,频率60Hz,与国内三根火线,一根零线的供电方式不同。
-10101010(10101010);
2008-5-8
(#4440614@0)
-
用电表测一下。
-roman(roman);
2008-5-8
(#4441234@0)
-
看看这个图。Typicial Home Electrical Service.
-nww(西北偏西);
2008-5-8
(#4441324@0)
-
那就220× sqrt(2) = 380 了。311? sqrt(3)?
-647i(流浪的步行万里);
2008-5-9
(#4443408@0)
-
=sqrt(1- 0.5*0.5) *2 *220 = 381.
-647i(流浪的步行万里);
2008-5-9
(#4443415@0)
-
机壳不可接地啦,小心碰到触电
-647i(流浪的步行万里);
2008-5-9
(#4443416@0)
-
the stove in your home is 240V (close to 220V), and huke up to the two live wire.In canada, it is 2 phase AC system in house. each one is 120V, and two phase is 180 degree offset. Therefore 220V equipment can use the two live wire in your house.
-jgl(JGL);
2008-5-14
{164}
(#4451659@0)